Hello Everyone.
Can anyone provide the solution don't know what happend with connect version 20.00.00.28 update 3.
When i analysis the model in series 6 model is work fine but when i m going to import it connect edition it will breakdown the entire model into so many part.
I attached my model here you can see in property tab and loading tab.
As i m going to project ASAP but project will delay with that problem than if this is happend everytime than why i m going to work with that version??
If again i want to open same model in Series 6 than having Same problem. In that case u need to do whole process again.
Error like to may exposure entries.
Provide me Solution ASAP.
Please.CH123.std
There were issues with the way the commands were specified in the file. For example MATERIAL CONCRETE 4 is not a valid command. The correct syntax is MATERIAL CONCRETE MEMB 4. Also there were too many exposure factors as all of these commands were provided in a single line format. I fixed these and the model runs now. A modified file is attached for your reference.
CH123_rev.std
Sir i agree with your answer but i just want to know why its happend?
Whenever i import model from series 6 to connect edition every time it will breakdown the model in multiple property, load etc. please provide me a proper solution because its not possible every-time i upload the model and you fixed it.
Look at the property dialogue box, load data there is so many property(i assign 6 to 7 property nut it will Show 1918 property) & similary happend with load data & Design Data..
Open that start-up page of STAAD.Pro, go to Configure -> File Format and make sure that option 'Write expanded list' is not selected.