I have an issue about wind load ,
when i have (bracing) on the side of whorehouse the area of wind load are dragging to corner of screen and when i delete the (Bracing) the wind are being OK as you see in the pictures
it appears that lines are dragging from middle of members and intersections of (bracing) and they are not nodes
Do you want to apply wind load for those bracings? Usually, bracings are excluded from the wind loading. In such case, you would need to create a group of members of each face where wind load needs to be applied excluding the bracing members and applied wind load for those groups.
Answer Verified By: Mujahid Oweida
You mean that I cant excluding the bracing members from the wind load without create a grouping members ?I don't use this method but I will try it.that was helpful, thank you so Much.
I don't get it,I done the groups with excluded the braces but how can assign wind load to these groups
You would have to assign the wind loading to the member groups using the input editor. More details are available at
https://communities.bentley.com/products/ram-staad/w/structural_analysis_and_design__wiki/2042/staad-pro-load-generation-faq#FAQ27
thank you Mr. sye