https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/193731/bentley-staad-not-responding-when-using-notional-loads-for-direct-analysisI am using STAAD Connect version 21.00.02.43. I have been trying to create a staad file for direct analysis with notional loads.However, when opening the file as indicated in the image, the software stops responding. This does not happen when removingen-USTelligent Community 12https://communities.bentley.com/thread/574138?ContentTypeID=1Fri, 13 Mar 2020 03:21:20 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:c2a6ff9e-9ab9-4abf-b411-a926c203b757Stephen Jacob<p>Yes, this is one of the staad learning files that I simply edited to test the syntax of the STAAD inputs commands for the intended final STAAD file.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/573976?ContentTypeID=1Thu, 12 Mar 2020 13:18:17 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:67e48a9d-de3b-4215-8af1-7fbb56da71afTank<p>I ran it successfully on version 22.03.00.28 (latest), however, I had to change FYLD 253200 in the Direct Analysis Definitions to FYLD 5184,&nbsp; because STAAD correctly thought it was too large and would not run.</p> <p>BTW, I noticed there was no code checking done. Once you get this working, you are going to add that, aren&#39;t you?</p><div style="clear:both;"></div>https://communities.bentley.com/thread/573899?ContentTypeID=1Thu, 12 Mar 2020 08:12:07 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:ec7ee79d-4675-4448-81ee-7631e2532044Modestas<p>I am able to open this model fine in the most recent STAAD.Pro CONNECT Edition version 22.03.00.28, so I would recommend you to upgrade to this version and check the model again.</p><div style="clear:both;"></div>