Importing/transferring a model from Structure Wizard into Staad Pro

RE: Importing/transferring a model from Structure Wizard into Staad Pro

H NANDINI — Thu, 17 Mar 2022 14:05:27 GMT

I'm also facing same problem with structure wizard it is not merging into staadpro

I'm using staad pro v8i ss6, can please help out from this soon

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Shruti Brahme — Sat, 02 Oct 2021 07:55:46 GMT

Hello Sir,

I am facing the same problem as you discussed above. Just in case you have resolved your issue then it would be a great help if you help me out with it.

I first had V8i version when i had these issues, then after reading your comments I installed CONNECT edition, but problem is not fading away

Please help me soon

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Tirrell Day — Thu, 18 Jun 2020 19:41:19 GMT

OK I feel its easier to discuss this way, send me email address when you get it

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Ajinkya Thakare — Thu, 18 Jun 2020 18:10:47 GMT

Neither of two.

Will get Skype in a minute

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Tirrell Day — Thu, 18 Jun 2020 18:10:03 GMT

do you have Skype or teams?

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Ajinkya Thakare — Thu, 18 Jun 2020 18:08:44 GMT

I am using Stadd. Pro V8i SS6 software.

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Tirrell Day — Thu, 18 Jun 2020 17:59:34 GMT

Hello Ajinkya, I can't say I have a resolution but at one point it began working. I first attempted opening and importing using V8i. This was successful. After this, subsequent edits in connect version mysteriously began to work. Don't know if related however. If you are on Skype I can assist you live

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Ajinkya Thakare — Thu, 18 Jun 2020 17:51:51 GMT

Hello Sir,

I am facing the same problem as you discussed above. Just in case you have resolved your issue then it would be a great help if you help me out with it.

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Ajinkya Thakare — Thu, 18 Jun 2020 17:50:24 GMT

Hello Sye,

I am also facing the same issue as disscussed above by Mr. Tirrell Day.

Just in case the above issue is resolved by you could you please help me out with the same.

I can prove you the necessay info required.

Early response is expected.

Thank You

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Ajinkya Thakare — Thu, 18 Jun 2020 17:47:22 GMT

Hello Sir,

I am facing the same problem as you discussed above. Just in case you have resolved your issue then it would be a great help if you help me out with it.

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Tirrell Day — Fri, 10 Apr 2020 01:21:28 GMT

communities.bentley.com/.../StillingBasin_5F00_Model_5F00_wHoles_5F00_Ph1.zip

Hello Sye,

this worked. Thank you. Also, thank you for the link for the revision history. I will submit this for our administrator. Please find attached the .stp file

-Tirrell

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Sye — Thu, 09 Apr 2020 23:31:37 GMT

If you zip the file, it should allow you to upload it. Let me check your file in my version (22.03.00.28) first and then we can take it up from there. I would still recommend that you talk to your system admin for the upgrade as 21.00.02.30 was released more than 2 years back ( March of 2018). So practically you are using a software that is more than 2 years old and missing out on all of the fixes which are listed in the revision history below

https://communities.bentley.com/products/ram-staad/w/structural_analysis_and_design__wiki/6555/revision-history

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Tirrell Day — Thu, 09 Apr 2020 20:48:15 GMT

Hello Sye,

I appreciate your timely response. I attempted to upload file via the insert file option but I receive an error. If you are able to provide me another means of sending this I am glad to provide for your examination.

Our current version for Staad.Pro CE is 21.00.02.30. Unfortunately, I cannot so easily update to the newer version you indicated as company wide licensing approval is required. If there is a fix for this particular issue which is corrected with the newer version, I would then request from Bentley any details indicating this which I can submit as part of our request for company wide update of package. I know you cannot help with this but would like to confirm that this is resolvable without updating, which is the best option for me within the next few days for my deadline.

If possible please provide another means for me to submit file to you for your review.

Thank you for your response.

-Tirrell

RE: Importing/transferring a model from Structure Wizard into Staad Pro

Sye — Thu, 09 Apr 2020 20:03:29 GMT

I tried replicating the issue and seems like it is working fine. Are you using the latest STAAD.Pro CE ver 22.03.00.28 ? If not, that is something I would recommend doing first. If you are using this version and still facing the issue, please send the .stp file that you created in Structure Wizard and I will see if I can replicate the error at my end.