Beams in One way Slab - Column Design Strip width smaller than beam width

Question

When running my model, I noticed I was getting column design strips widths smaller than the width of my beam. I changed my settings in the strip generation tab to column strip width calc for "Code T-beam" and checked the box "design column strip for column + middle strip resultant" still no luck. What could I be missing in the settings? I attached an image as well. 
 
 Best, 
 Skylar Calhoun

Seth Guthrie · Answer

If you want to force the column strip width to be wider use a the "manual" option, with column strip boundary polylines on each side defining the column strip with you want.

Seth Guthrie · Answer

If you want to force the column strip width to be wider use a the "manual" option, with column strip boundary polylines on each side defining the column strip with you want.

Seth Guthrie · Answer

No, the programs have slightly different methods to determine T-beam widths (in RAM SS, the width is always constant over the length, in Concept in can vary). Manual column strip boundary polylines are what you want. Though for the structure above, if it's mild-reinforced concrete beams and one way slabs, why use Ram Concept at all? Ram Concrete beam would do nicely.