RE: Floor ONEWAY Loads error

Dani Paul — Sun, 06 Aug 2023 07:48:20 GMT

[quote userid="30356" url="~/products/ram-staad/f/ram-staad-forum/205092/floor-oneway-loads-error/616644"] latest STAAD.Pro CE[/quote]

my observation in STAAD.Pro CONNECT Edition - Version 22.12.00.142 (not sure if this is rectified in STAAD.Pro 2023 - Version 23.00.01.25)

- i've defined floor loads under Reference Loads

- these floor loads, i've applied to the structure using the 'group' option and as the loading is for grating, 'One Way wrt a member 10683' (for instance) is assigned for direction

- but, when the structure / beam is renumbered completely (starting with 20001), it shows error that member 10683 is not found in the model

- and since the loads are not applied, it needs manual intervention to feed the member number again

RE: Floor ONEWAY Loads error

Modestas — Tue, 27 Oct 2020 13:27:38 GMT

Sounds like an issue which existed in some older STAAD.Pro versions. If you are not using the latest STAAD.Pro CE (version 22.05.00.131), please upgrade to this version and see if floor loads are working fine there.