https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/208023/warning-in-ram-connectionI tried to design a End Plate shear connection using STAAD RAM connection. But it is showing a warning that, Kindly explain what is the meaning of that. Thanks in advance RAPen-USTelligent Community 12https://communities.bentley.com/thread/627703?ContentTypeID=1Tue, 05 Jan 2021 11:49:27 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:adbbc03c-7c38-4bbb-80fd-84eed8cee913Modestas<p>The length of the end plate is too long and does not fit into the beam (considering the fillet radius). This is also mentioned in the Geometric Consideration check - Max value for the end plate length is 123.6 mm. Changing the Vertical edge distance from 35 to 30 mm should get rid of this warning.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/627674?ContentTypeID=1Tue, 05 Jan 2021 08:51:36 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:fe550c68-3882-4347-8d0b-2fcd0b3ef3f2Modestas<p>Please attach STAAD.Pro model (.std file) as well as files .cut, .rcc and .rsd (which are located in the same folder where STAAD.Pro model is located).</p><div style="clear:both;"></div>https://communities.bentley.com/thread/627673?ContentTypeID=1Tue, 05 Jan 2021 08:49:24 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:6624cfb4-9ec0-487b-843b-790b61deb607Alagu Pandi R<p>Warning shows that &quot; Connector Does not fit on beam&quot;&nbsp;</p><div style="clear:both;"></div>