I'm having issues with an overhang cantilever beam supporting an overhang cantilever beam. The second cantilever beam is supported by a column on one end and cantilever beam 1 on the other end. See image below.
That should work fine. Just be sure that beam 46 frames from column to column with a cantilever, and that beam 38 is modeled from grid 52 to grid 6 (the first cantilever) and with a cantilever extending to the right, ending at grid 7 / beam 39.
Answer Verified By: RFreund
Thanks, I got it to work. It turned out there was very small misalignment issue that was causing the error.