Hi, When rebuilding Mesh data in Ram Frame, I get the following warning: Deck Properties for some elements on story... see image below
I have gone thru the modeler but could not find any location on the diaphragm where deck was not assigned. The diaphragm in question has one-way and two-way slabs mixed.
Any help would be appreciated.
I have uploaded the file via Secure File Upload. the file name is "Ronk 2A Model.rss".
If it's a mixed slab with one and two way decking (aka hybrid slab), then it all gets meshed.
For general help on meshing issues, see: https://communities.bentley.com/products/ram-staad/w/structural_analysis_and_design__wiki/4027/ram-meshing-and-segmentation-tn
I like to review the mesh in plan view and zoom into the area of the warning to see what's missing or poor about the mesh. Sometimes it's so tiny not to worry about.
Seth, The warning does not provide coordinate for the area in question. Any ideas how to approximate the location on plan?
Scanning the whole floor might turn up something. If you don't see any gaps or bad meshing evident in plan view, then it must be minor. Reviewing deflected shape in 3D view is also useful.