RAM Frame - Meshing Warning

Question

Hi, When rebuilding Mesh data in Ram Frame, I get the following warning: Deck Properties for some elements on story... see image below 
 
 I have gone thru the modeler but could not find any location on the diaphragm where deck was not assigned. The diaphragm in question has one-way and two-way slabs mixed. 
 Any help would be appreciated.

Seth Guthrie · Answer

If it's a mixed slab with one and two way decking (aka hybrid slab), then it all gets meshed. 
 For general help on meshing issues, see: https://communities.bentley.com/products/ram-staad/w/structural_analysis_and_design__wiki/4027/ram-meshing-and-segmentation-tn 
 I like to review the mesh in plan view and zoom into the area of the warning to see what's missing or poor about the mesh. Sometimes it's so tiny not to worry about.

Seth Guthrie · Answer

Scanning the whole floor might turn up something. If you don't see any gaps or bad meshing evident in plan view, then it must be minor. Reviewing deflected shape in 3D view is also useful.