RAM | STAAD | ADINA

RAM | STAAD Forum Beam to beam connection

Beam to beam connection

Offline Dickson over 3 years ago

Hi all,

I am designing for beam to beam connection with fin plate. I have attached the design reports.

Meanwhile, I have encountered the following error. Is it logical for the formula as in figures below?

Top Replies

Offline Abhisek M Fri, Apr 9 2021 5:50 AM +1 verified

Hello, I tried to duplicate the connection at my end in RAM Connection version 13.04.01.9. There I am getting different output and there is no minimum value. Can you please check the connection in…

Parents

+1 Offline Abhisek M Fri, Apr 9 2021 5:50 AM
Hello,

I tried to duplicate the connection at my end in RAM Connection version 13.04.01.9. There I am getting different output and there is no minimum value.

Can you please check the connection in the latest version as above. If you still faces the problem please share the .rcnx file for further investigation.

Thanks & Regards,

Abhisek Mandal

Global Technical Support
Answer Verified By: Dickson
Cancel
Vote Up +1 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel

Reply

+1 Offline Abhisek M Fri, Apr 9 2021 5:50 AM
Hello,

I tried to duplicate the connection at my end in RAM Connection version 13.04.01.9. There I am getting different output and there is no minimum value.

Can you please check the connection in the latest version as above. If you still faces the problem please share the .rcnx file for further investigation.

Thanks & Regards,

Abhisek Mandal

Global Technical Support
Answer Verified By: Dickson
Cancel
Vote Up +1 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel

Children

No Data