Seismic Provisions Joint Code Check Output Clarificationhttps://communities.bentley.com/products/ram-staad/f/ram-staad-forum/215205/seismic-provisions-joint-code-check-output-clarificationHi, I wanted to clarify the output for the seismic provisions joint code check in regards to continuity plate. I am unclear of what the 0.66&quot; under &quot;Tf Prov (in)&quot; is indicating. Do I need a 0.66&quot; thick continuity plate? Also, how is RAM arriving aten-USTelligent Community 12RE: Seismic Provisions Joint Code Check Output Clarificationhttps://communities.bentley.com/thread/654965?ContentTypeID=1Fri, 11 Jun 2021 16:40:40 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:3f5f8004-74da-4489-a951-80ca1a8445ceNicholas Sebald<p>Perfect, thank you</p><div style="clear:both;"></div>RE: Seismic Provisions Joint Code Check Output Clarificationhttps://communities.bentley.com/thread/654963?ContentTypeID=1Fri, 11 Jun 2021 16:38:44 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:688cf842-1b73-4e7d-82da-7fda7f9f372fSeth Guthrie<p>Tf provided is the column flange thickness.&nbsp; If the column flange thickness was greater than Tf required, then no continuity plates would be needed. We don&#39;t size the continuity plates. If a doubler plate was needed that would be called out clearly along with the required thickness.&nbsp;</p><div style="clear:both;"></div>