Dear all,
I am a beginner in STAADPRO and I have already read some topics on this forum about this problem. And I tried to improve my model so on.
And I have a lot of warnings . Can anyone help me giving me some advices and tell me what's wrong with my model here please ?
Thank you.
Edit:
-It has been fixed, moving seismic loads, selfweight has been deleted. But I can' t understand all the other warnings... I know that I didn't create my load combinations
Edit 2:
If you are applying loads to plates, think about meshing your plates. I removed the file, this is normal if you can't see what we are talking about. Sorry.
Most of the warnings will be removed by meshing the vertical plates - divide those plates vertically into 10 parts and those warnings will disappear.
Material related warning is reported due to Dummy materials which you created - you can safely ignore it.
An explanation of this warning
**WARNING: IF THIS UBC/IBC ANALYSIS HAS TENSION/COMPRESSION OR REPEAT LOAD OR RE-ANALYSIS OR SELECT OPTIMIZE, THEN EACH UBC/IBC CASE SHOULD BE FOLLOWED BY PERFORM ANALYSIS & CHANGE.
can be found here: https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/91953/ibc-ubc-warning-in-my-canadian-seismic-load-model/264284#264284
Answer Verified By: Dimitri
Thank you so much !
Have a nice day !