https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/217931/ram-frame-single-angle-aisc-code-check-compressionI understand that RAM automatically prevents a code check on certain shapes that are often intended on being for tension-only. https://communities.bentley.com/products/ram-staad/w/structural_analysis_and_design__wiki/3058/ram-frame---tension-only-faqen-USTelligent Community 12https://communities.bentley.com/thread/665646?ContentTypeID=1Tue, 10 Aug 2021 21:39:49 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:0064176a-843a-4010-96b9-22ec1f2f8465Robert Miller<p>Thanks, Seth. Yes, single angle X-bracing is used extensively in self-storage buildings, so it is not an uncommon member design.&nbsp;</p><div style="clear:both;"></div>https://communities.bentley.com/thread/665645?ContentTypeID=1Tue, 10 Aug 2021 21:35:27 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:4f0dd57b-9d7e-4e15-82dc-94c1cc5f967cSeth Guthrie<p>Sometimes when there is a new code edition our structural software (Ram, Staad, etc.) will all use a freshly developed common code component. I think that&#39;s the case here, but single angle compression checks should be included in that component. It&#39;s probably something we can add, or at least report consistently. I&#39;ll pass it along.&nbsp;</p><div style="clear:both;"></div>