Wall openings in RAM Concept

Question

Is there a way to model openings in RAM Concept? 
 
 Any leads would be much appreciated. 
 
 Thank You!

Seth Guthrie · Answer

No. You can segment the wall and leave out the wall segment over the opening. Then model a beam there.

Seth Guthrie · Answer

The wall is still imported as a solid with an equivalent line load reaction, so for walls with large door openings, I would suggest the segmented wall approach in RAM SS. Use a beam across the gap (over the opening) unless it's a very deep lintel in which case you can add a story and leave out the wall on the lowest story only.