In the content portion of STAAD analysis output, for relative strength check of joints there is a message "Please refer _13920.txt file for details"
where to find this file?
Regards
Thanks sir.
please also guide if the 'F' and 'P' symbols signify 'Fail' and 'Pass'.
If yes, please clarify why the output file says " *** NOTE: Relative strengths of beams and columns at joints is checked against Cl 7.2 of IS-13920:2016 and no failures are detected. The relative strength checks include joints where all connected beams and columns are designed successfully."
Hello chao,
F denotes fail and P denotes Pass.
The note is misleading and we have identified that alreday. we will correct he same in future release. For the time being please refer the .txt file to know the exact situation.
Thanks sir,
As per clause 6.4.3.1 of IS 1893 (Part-1) -2016, property reduction factor is to be applied on beam and column prior to analysis.
This reduction is to be applied only for structural analysis and not structural design.
what is the procedure/command to revert to original section before structural design?
Is this the main reason for too many joint failure as per para 7.2 of IS 13920-2016?