RAM connection Tubular/pipe connection bracing

RE: RAM connection Tubular/pipe connection bracing

Seth Guthrie — Mon, 30 Aug 2021 20:15:36 GMT

Our code priorities for this are AS and NZS and AISC codes. EN or IS codes would be later.

RE: RAM connection Tubular/pipe connection bracing

Kamal Dhar — Mon, 30 Aug 2021 11:33:11 GMT

Thankyou for update, however I would like to inform you that in addition to AISC 360 and EN design code, we also use IS 800 design code for connection in projects. So please keep the same in mind, while developing the K type truss gusseted connection in RAM as we will be using this connection to be designed as IS 800 code.

RE: RAM connection Tubular/pipe connection bracing

Seth Guthrie — Sat, 28 Aug 2021 13:30:59 GMT

About a month for the next version.

RE: RAM connection Tubular/pipe connection bracing

Kamal Dhar — Sat, 28 Aug 2021 07:50:43 GMT

In most of cases AISC 360 and EN Design code is used. Is there any timeline when the K type truss gusset connection will be implemented in RAM connection, as it is known that all the connection design from Limcon will be also available in RAM connection.

Do advise.

RE: RAM connection Tubular/pipe connection bracing

Seth Guthrie — Fri, 27 Aug 2021 20:00:59 GMT

We are implementing the gusseted K type truss connections currently and that should be in the next version. Only the welded type tubular truss joints are in Ram Connection now. What design code are you using?