https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/222572/error-in-moving-load-generationI have attached my STAAD 3D model with a moving load generator which when run is giving me an warning message. The warning message reads &quot;No Members in specified Vertical Range&quot;. The moving load is being applied to level and straight beams. Can someoneen-USTelligent Community 12https://communities.bentley.com/thread/684199?ContentTypeID=1Thu, 25 Nov 2021 04:21:16 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:c3869862-88f0-4f94-9cf6-36a88868e914Vignesh Mathivanan<p>Thanks a lot for the prompt response. This worked fine and the warnings are sorted.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/684092?ContentTypeID=1Wed, 24 Nov 2021 15:38:22 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:ca323759-3f20-4871-ab00-f413bf6b6acdModestas<p>Seems to be a precision related issue. The actual Y coordinate at the top of the structure is 8.2864 m (check the input file for the actual Y value), while in the moving load generation you are using a value of 8.286 m of the initial load position at y coordinate. Change that value to 8.2864 m and these warnings should disappear.</p><div style="clear:both;"></div>