TAPERED STEEL COLUMN STAAD PRO C.E

I need a help, i have a tapered steel column as shown, i have attached my model

3683.Structure1.STD

Bottom

 

Top 

when i enter my data but i end get up wrong dimensions as shown on pedestal data

I need your Assistant

Parents
  • For tapered member the program uses the average value. 

    Here depth = (300 + 1050)/2 =675mm.

    The width should be shown as 250mm but it seems to be some other value calculated internally.

    Whatever may be the case, both the values are incorrect and needs to be fixed.

    Can you please upload the Staad model so that I can log it in our internal system? Also please let me know the version number of STAAD you are using.

    Thanks & Regards,
    Abhisek Mandal
    Global Technical Support

Reply
  • For tapered member the program uses the average value. 

    Here depth = (300 + 1050)/2 =675mm.

    The width should be shown as 250mm but it seems to be some other value calculated internally.

    Whatever may be the case, both the values are incorrect and needs to be fixed.

    Can you please upload the Staad model so that I can log it in our internal system? Also please let me know the version number of STAAD you are using.

    Thanks & Regards,
    Abhisek Mandal
    Global Technical Support

Children