A019_PX2_Control Room BLDG_R5-23.05.2022.STD
How to resolve the error in staad ********warning : zero spectral acceleration entered for mode 1
and also when i am trying to design beam in Rcdc after auto design it is showing that ************Beam forces not imported ****************
The releases you have used are not correct and due to that your model is having enormous displacement. Please review the releases and change. This will solve the issue. I tested commenting out the below marked releases and the file is working fine.
Also the file can be read in latest version of RCDC 11.03.1.10.
Thanks & regards,
Global Technical Support
0825.A019_PX2_Control Room BLDG_R5-23.05.2022.STD
DEAR SIR when working in RCDC for design of beam as per IS 456 - 13920........... @lvl 19.400 grp 28, @lvl 14.650 grp 28 , @lvl 9.850 grp 47 beams are failing by increasing the size also it is failing at this floors
I can still see that you have used moment releases to beams which are connected to columns. You need to rectify it. Even I can see moment releases in Columns- can you please check them again?