https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/235626/floor-load-generationKindly refer to the model attached and reference pictures. For FLOOR LOADS created under REFERENCE LOADS I am getting &quot;WARNING- NO MEMBERS LOADED FOR A FLOOR LOAD GENERATION.&quot; However, in the GUI the same panel is indicated as loaded for the loaden-USTelligent Community 12https://communities.bentley.com/thread/732077?ContentTypeID=1Thu, 15 Sep 2022 13:19:11 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:3feb9c0f-4dc0-49b5-9524-1834a67cde24Modestas<p>You should not be using the exact coordinates in the Floor ranges. Instead, a minimum range should be slightly lower than the actual coordinate is and the maximum range should be a bit larger than the actual coordinate is. I.e.</p> <p>I.e. if your X coordinates of the boundary are 6.78 and 11.304, then you should be using XRange with minimum value as 6.75 and maximum as 11.31.</p><div style="clear:both;"></div>