STAAD Pro Version 22.10.00.153

Question

WE HAVE TRIED WITH THE FOLLOWING AVAILABLE COLD FORMED SECTIONS: 
 
 Angle With Lips - 1 
 Double Angle (LD) 
 Double Angle(SD) 
 Channel With Lips 
 Channel Without Lips 
 Double Channel Back to Back 
 Double Channel Front to Front 
 Zee With Lips 
 Hat Section 
 
 Even after our several trials, we couldn&rsquo;t able to find any Best Possible Passing Profiles from the above complete collection of the STAAD Profile.

Abhisek M · Answer

Hello, 
 Did you check any one member with your hand calculations? With the loads and moments the members are hhaving and considering the span, is it passing in your manual calculation? 
 A validation for IS801 can be found in below location in help file. You may check that. 
 
 file:///C:/Program%20Files/Bentley/Engineering/STAAD.Pro%20CONNECT%20Edition/Help/GUID-E6604057-DD21-4779-8428-A08817A6ECA2.html