https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/237063/input-reported-column-eccentricityHow can I confirm column eccentricity in RAM SS? Within the Data Echo report it notes in the column table that &quot;values with a + indicate eccentricity plus 1/2 column dimension&quot;, then in the table is notes &quot;+100&quot; however these notes in the report do noten-USTelligent Community 12https://communities.bentley.com/thread/737518?ContentTypeID=1Wed, 19 Oct 2022 17:38:01 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:90b006c0-f04f-4045-8365-a4eefb71e84cAngelica Tijssen<p>This did the trick, thanks a bunch!</p><div style="clear:both;"></div>https://communities.bentley.com/thread/737335?ContentTypeID=1Tue, 18 Oct 2022 22:00:03 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:3130f6d6-cc8c-46b1-8654-bb845992ef76Seth Guthrie<p>Eccentricity is assigned column-by-column. There is a criteria in the Modeler that the user can set (options - set defaults...), but this has no effect on existing columns. To change the eccentricity on existing columns you have to use Layout - Column - Assign eccentricity&nbsp; (then select).&nbsp; If that&#39;s not the cause of your confusion, I suggest using the Ram Steel Column design report to check the final eccentricity considered.&nbsp;</p><div style="clear:both;"></div>