https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/239411/about-getmembersteeldesignratio-functionHi, I need some help here. I am trying to do some automatic design by reading the utilization ratio from the results. I believe in Open Staad there is only one function called GetMemberSteelDesignRatio which returns a True or False value: GetMemberSteelDesignRatioen-USTelligent Community 12https://communities.bentley.com/thread/746495?ContentTypeID=1Sun, 18 Dec 2022 23:14:04 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:dcd72175-ab90-4831-9506-b073ca790859Kevin Wen<p>Thanks Shreyanka, problem was solved as I have got some misunderstandings about the parameters</p><div style="clear:both;"></div>https://communities.bentley.com/thread/745624?ContentTypeID=1Mon, 12 Dec 2022 04:46:40 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:2677b926-b6fe-4bd6-a0e1-87d52b278b2bShreyanka Bhattacharjee<p>You may refer to below wiki</p> <p>&nbsp;<a href="https://communities.bentley.com/products/ram-staad/w/structural_analysis_and_design__wiki/11981/get-member-steel-design-ratio">Get Member Steel Design Ratio</a>&nbsp;</p><div style="clear:both;"></div>https://communities.bentley.com/thread/745609?ContentTypeID=1Mon, 12 Dec 2022 01:20:05 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:909ae0b9-826c-49f4-8eec-47d11146198fKevin Wen<p>*Solved</p> <p>I had some misunderstanding about the function, actually rat is not an input, but output</p><div style="clear:both;"></div>