When the temperature load apply model seems abnormal. What is the reason
2703.std
To attached the summary table with temperature load (Image1),without temperature load (Image2).
Image 1
Image 2
Yes, this looks reasonable.
yes correct, now i changed model with temperature load with two cases as T1 and T2.
as soon in below image, pl review
00.std
When the temperature load apply model seems abnormal. What is the reason.
OK, so in that case you need to provide your calculated f1 values in your model instead of 33 degrees which is currently used.
ok thanks, i have used above links to calculated temperature load.
temperature at the stress-free condition for me is 28.15 degree C.../
The calculation of temperature loads is explained here:
communities.bentley.com/.../temperature-loading
or here:
communities.bentley.com/.../temperature-load-on-plate-element
As yous see, to calculate the load due to temperature you must know what the temperature at the stress-free condition is. So what is that temperature at your case?