Hi all,
I have a set of similar joints as captured below, can we apply the same connection detail to all these joints? As for now, I only can update the joint one by one by clicking on the joint number in the table on the right hand side.
This Wiki explains the process: How to modify a group of connections at the same time in STAAD.Pro? - RAM | STAAD | ADINA Wiki - RAM | STAAD | ADINA - Bentley Communities
Answer Verified By: Son Nguyen
Thank you for your help Modestas,
Further to the topic, could you please explain what is the "structural integrity" in the connection check? as I can see, it does impact seriously to the design result if we consider this "structural integrity" or not.
When the Structural Integrity option is checked, the requirements for structural integrity are included in the design (Section 1.2, EN 1991-1-7). All buildings must satisfy certain structural integrity requirements. For some classes of buildings it will be necessary to check the connection for horizontal and vertical tying forces, used to ensure a minimum level of robustness and to prevent disproportionate collapse in the event of an accidental action affecting the structure.
Thank Modestas,
For the connection with a brace angle connected to the beam flange as captured below, is there any connection type can be used in Staad Pro connection? Previously when I used US codes, this connection can be dealed by Gusset Plate CVR (Gusset Plate, Chevron), but it is not here when I use Eurocode.
Regretfully, but such template is not implemented for Eurocode.
Thank you very much and noted Modestas