Hello Everyone!
In the attached Staad file, I am having trouble getting rid of few warnings. Also, I believe Wind loading is also not applied correctly. I used Staad V8i.
Please help me.
Regards,
Pawan Waghmare
In the model you have applied nodal restraints to many upper nodes (when one would normally only restrain the base nodes). I assume you had a good reason for this. Regardless, the only warnings I'm getting with your file are related to the floor load generation. The generated trapezoidal loads appear to be logical despite the warning, but I admit I did not confirm the magnitudes of each.
I'm not quite sure what you think is wrong with the wind loads, but those upper level supports may be causing the issue.
the warning is because of the cordinates. kindly make the cordinates to first decimal, means for the minimum value it has to be rounded of to least value and for the maximum value it has to next highest,
as in your case for the load case 11 wehre the warinings are coming
the z cordinates are z min 5.92, it has to be 5.90 and z max 7.07, it has to be 7.1
Now the warnings will not be there
Thanks a lot