Staad Foundation Advance

I think staad foundation advance still needs to be improved. Here are some suggestions.
1- When we import load cases and combinations from staad, we have to change description of every load and load cases by selection each one by one (i.e it is primary load case, ultimate load case or allowable load case. Can you please create an option or introduce a feature so that it can be done in minimum steps.
2- Can you please introduce a feature to import load cases and combination from excel or notepad file and load template can also be saved from staad foundation advance to notepad or excel file.
3- There should also be a feature to design combined footing with four pedestals (two in front  of each other, not like strip footing) by rigid method.
                                                                                    
 
4- There should also be a feature to design combined footing with four pedestals of following shape by rigid method.
5- Its detaied output in excel show only output results,There should also included some basic inputs and footing sketch showing  overall dimension and pedestal sizes.Even its detailed output report does not show  calculated reinforcement in both footing and pedestals.
6- For heat exchanger and vessels there is no input of reinforcement dia and spacing for pedestal design. also it offently fail footing in shear while other softwares not.
7- When it is fail in punching shear then design is skip. Calculation does not show that from which factor it is failing.