https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/97294/help-needed-with-concrete-design-analysis-reportHello everyone, i just need to know if it&#39;s possible to print data about the area of reinforcing steel on the reports that can be made by staad.pro, also if there is a way to show those values the same way it does with bending, shear, deflection, envelopeen-USTelligent Community 12https://communities.bentley.com/thread/285097?ContentTypeID=1Wed, 21 May 2014 17:53:58 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:64583b88-f756-4e28-810e-2cade3526f9fDaniel Sanz<p>thanks a lot! for the help Sye!!, i was thinking that also, as an option to include all the data, and about the pictures, i figured out it will be better to add the info i want editing the images with photoshop</p><div style="clear:both;"></div>https://communities.bentley.com/thread/284988?ContentTypeID=1Wed, 21 May 2014 00:53:44 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:86670992-72b9-4432-8001-743acd12debcSye<p>The output that you get for concrete design in the analysis output file ( also referred to as batch mode design ) cannot be included as part of the report. You can either directly print out the relevant pages of the analysis output file or you can open the analysis output file ( better make a copy of the .anl file first ) using MS Word and that way get the data into a Word document that can be further edited/formatted. &nbsp;</p><div style="clear:both;"></div>