*** ERROR *** ABOVE COMMAND IS NOT RECOGNIZED. LINE IGNORED. i cant understand

I am attempting to assign and design gusset plate connections using Ram connection using data from a RSS model. When trying to assign a connection detail to a joint the error The joint composed by node "171" and members "120, 886" is not valid "Column…

Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

How to create a cantilever slab without beams in the Physical modeler in STAAD connect edition?

Hello, I have a one-story building with sloping parapets on the exterior walls and flat parapets on an interior portion (see white colored parapets in image below). Currently, my model has the floor and the roof, with the roof having the deck and…

warehouse.zip wind calculation also in that folder.... try to fix this probem guys

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

I opened a fully analyzed .rss file in RAM Connection. I selected one of the foundation nodes for baseplate design. So far it has been running for 75 minutes and still has no design. Is this a program issue or a user issue.

When you model a cantilever beam with type "extension" at a lower level of a multi-story column, does RAM SS analyze the column as continuous or does it assume the beam essentially passes through the column? In other words, do the moments from the cantilever…

If you work with CIS/2 files in your structural project workflow, you may find a new article in the Wiki helpful. It describes a free tool available from NIST to view a CIS/2 3D model in a web browser. Viewing CIS/2 FIles Steve

All, I am looking for some guidance, when determining the lambda critical value for a structure within RAM Frame, does the programme do anything with this? In particular, if the lambda critical value is less than 10, but greater than 4, does the…

Panel Zone shear Vpz is determined. It is reduced by "Vc". I can find no discussion of this variable in any manual or in any post on this site. I have made a few attempts to recreate this assuming that it is shear in the column, but have had little luck…

I am designing a composite floor system as my first project in RAM. As I was looking at the composite beam deflections and checking them to make sure I understood and agreed, it seemed that the Post-Composite Beam Deflections for a S-S beam with a UDL…