*** ERROR *** ABOVE COMMAND IS NOT RECOGNIZED. LINE IGNORED. i cant understand

I want to convert student licence version to Licence version

Hello, I have exported the load cases from a STAAD model to a foundation model, and I have begun the design for pile caps. However, I am getting strange values for Dcritical. I have a 48" thick pile cap, and the effective depth calculation reads as follows…

can someone solve my problem ?? "staad 2d- error " can someone slove this

Hello sir(s), While deigning structure in staad as per IS 13920 i got following Note in output. NOTE :- SOME OF THE BEAMS CONNECTED TO THE COLUMN NO. ** ARE NOT DESIGNED. ONLY SHEAR FORCE FROM ANALYSIS WILL BE CONSIDERED FOR SHEAR DESIGN. Please…

Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

How to create a cantilever slab without beams in the Physical modeler in STAAD connect edition?

How to rectify this failure known as 'Detailing failure' in RCDC

Hello Sir RCDC is designed and Detailed all the slab one by one but I want to detail all Top and Bottom Reinforcement of the two-way slab once, what should I do.

warehouse.zip wind calculation also in that folder.... try to fix this probem guys

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

I have a number of beam in my model and when i run a unity check some fail by different "clauses" Below are all the list clauses that i am coming up with. clause h1/2 clause h3 clause g clause e2 Does anyone know where i can find a definition…

Hi all in the attached model, it has been split into several boundaries within a outer boundary (this was done as the depth is different for each boundary. while using Parametric mesh and creating the adjacent boundary mesh, it was found that…

Dear friends I need your help to solve a error when i try to open Staad pro model in STAAD offshore. I'm not able to load my model because user defined section database property developed in STAADPRO is not recognized in STAAD Offshore. How i need…

I think staad foundation advance still needs to be improved. Here are some suggestions. 1- When we import load cases and combinations from staad, we have to change description of every load and load cases by selection each one by one (i.e it is primary…

If you work with CIS/2 files in your structural project workflow, you may find a new article in the Wiki helpful. It describes a free tool available from NIST to view a CIS/2 3D model in a web browser. Viewing CIS/2 FIles Steve