• *** ERROR *** ABOVE COMMAND IS NOT RECOGNIZED. LINE IGNORED. anyone plz help me

    *** ERROR *** ABOVE COMMAND IS NOT RECOGNIZED. LINE IGNORED. i cant understand

  • Implemantation of amendment -2 of IS 1893-2016 in staad pro connect edition

    Please let me know that amendment -2 of IS1893-2016 has been updated in the staad pro connect edition. inform the version of that staad pro connect edition if updated otherwise when same will be updated .

  • PAGE NO. 1 **************************************************** * * * STAAD.Pro V8i SE

    can someone solve my problem ?? "staad 2d- error " can someone slove this

  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

  • How to create a cantilever slab by using the Physical modeler?

    How to create a cantilever slab without beams in the Physical modeler in STAAD connect edition?

  • RCDC Detailing Failure

    How to rectify this failure known as 'Detailing failure' in RCDC

  • Can I design a Continuous two slabs by using RCDC STAAD?

    Hello Sir RCDC is designed and Detailed all the slab one by one but I want to detail all Top and Bottom Reinforcement of the two-way slab once, what should I do.

  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys

  • Shear results from query dialog box and postprocessing are different, so which is correct, please help me

  • how to get the loadings details in report????

    I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

  • Re: Bentley Structural to Staad- Plates

    That's a rather old version of Bentley Structural, and I'm not sure that we even supported analytical plates back then. I can confirm that both XM and V8i do, as there's an Analytical tab on the Add Structural Attributes tool. This allows plates to be…

  • Tension Only member with initial axial capacity

    Hello to all, In reality horizontal braces (or vertical brace, beam, etc) that is design for tension only resist "some" axial compression capacity. Is there a way that this axial compression capacity can be input in STAAD? For example, a horizontal…
Communities
Support and Services
Training and Learning
Social Media