• Hi everyone, can someone help me about how to apply load for all model (if u have rectangular frame of the HEA 200) when crane driver carry up it to above ?

    hi

  • HI, everyone can anybody help me to create frame for storge oil tank without support (fixed, pinned, foundation,.............etc), because we have crane carry up this frame, so weight of the model will go above cuz crane, need strong designer to solve...

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 19-Nov-22 END JOB INFORMATION INPUT WIDTH 79 UNIT MMS KN JOINT COORDINATES 12 14700 6850 0; 13 19450 6850 0; 14 27450 6850 0; 15 30101 6850 0; 16 14700 6850 4200; 17 19450 6850 4200; 18 27450 6850 4200;…

  • Deflection Failure of Member , due 1/4" max limit for deflection limit

    Hi Please find attached Staad file, I need to Limit the deflection of member to 1/4" (MAX) per project standards. But for Member 11 & 12 , I am getting more than 1/4" deflections. Can I get any help to fix this, it will be highly appreciated. Thanks…

  • Primary and Secondary beams Intersection vs merge

    Hello Everyone Which is better to intersect the primary beam and secondary beam (Figure1), or Merge the primary beam to be one (Figure2)?

  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

  • Mton/Cm to Kn/m

    How do I change Mton/Cm to Kn/m

  • staad Utilization for bigger section higher than lower section

    good day, i tried designing a simply supported steel beam on staad pro using the same loading but i tried different Dmax UB 533X210X138 = Utilization ratio= 0.9852117 UB 457X191X161 = Utilization ratio = 0.75 isn't the lower steel section supposed…

  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys

  • Shear results from query dialog box and postprocessing are different, so which is correct, please help me

  • how to get the loadings details in report????

    I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

  • UC Ratio problem

    Actually i need all members UC Ratio values. How to get all values???? Please guys guide me New folder (2).rar

  • how to reduce deflection????

  • Re: information

    I don't think you are going to find much. The documentation for the two programs is probably the best thing you will find, and that's not specifically geared towards the Indian codes. It's one of those things where learning by trial and error is fast…
Communities
Support and Services
Training and Learning
Social Media