Hi, Based on NBCC 2015 4.1.8.11 4) single storey buildings with steel or wood deck as diaphragms can have a higher fundamental period compared to 4.1.8.11 3) as seen in the snap below. However, in the current RAM frame the Ta is only based on clause…

I've received a site specific spectral acceleration plot from the Geotechnical Engineer. How do I apply this plot with the inputs for RAM Frame? Do I calc the site specific acceleration based on RAM's calculation of the period and compare this to the…

How do I change Mton/Cm to Kn/m

I am using RAM SS to evaluate concrete shear walls in an existing building to determine the feasibility of a vertical expansion. All shear walls are 12" thick. Typical single-direction shear walls have 24" X 24" boundary elements on their ends. Boundary…

warehouse.zip wind calculation also in that folder.... try to fix this probem guys

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

Does anyone know if/how you can model bundles of rebar in RAM Structural System? Currently I'm only seeing the equal spacing method for placing rebar within the concrete columns, but this is overly conservative when considering the bending stress in the…

Has anyone seen the manual for the new OpenRETM file format? Is it a format that will allow me to bypass the graphical user interface to build a structure? RAM Elements V11.0 Release Notes OpenRETM™ The new OpenRETM™ is a file format that allows…

I was wondering if there is any literature on the best way to approach the design of a simple four sided moment frame building using RAM Structural System? Thanks, Scott