• input unit in properties page

    Eventhough set up in metric METER , KILONEWTON and set up force units in display options, still when i define properties in property page in metre when it is entered the value is converted to inches.pl help
  • Hi everyone, can someone help me about how to apply load for all model (if u have rectangular frame of the HEA 200) when crane driver carry up it to above ?

    hi
  • HI, everyone can anybody help me to create frame for storge oil tank without support (fixed, pinned, foundation,.............etc), because we have crane carry up this frame, so weight of the model will go above cuz crane, need strong designer to solve...

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 19-Nov-22 END JOB INFORMATION INPUT WIDTH 79 UNIT MMS KN JOINT COORDINATES 12 14700 6850 0; 13 19450 6850 0; 14 27450 6850 0; 15 30101 6850 0; 16 14700 6850 4200; 17 19450 6850 4200; 18 27450 6850 4200;…
  • ERROR- IN READING MEMBER PROPERTIES. CHECK DATA FORMAT CAREFULLY."

    I am trying to analyse an aluminium frame but sections to be used are not in database so I tried USERTABLE and made 2 sections First is 30x20x1.4 mm channel section and second is SHS 40x40x1.4 . After runing analysis it throughout an error as in subject…
  • staad.pro connect edition version 22.10.00.153

    Dear Sir, Our Project Requirement: 600’ x 200’ x 43’ PEB Warehouse We’ve taken a Model of 157’ x 200’ x 43’ for STAAD Analysis as a similitude model with EJ For the last 45 days, our design engineers have been carrying out the design work of the…
  • ERROR: MEMBER # 3 IS NOT A VALID COLD-FORMED STEEL SECTION. E-10 - in Staad.pro

    Hi Staad master sirs, I’m Trying with the Staad.pro model of a Rack system with Economic solutions - which consists of Hot Rolled Sections + Cold-Formed Steel sections, by using IS800 + IS801. My entire members are only supposed to be Designed as Hot…
  • WALL OVER A SLAB

    How did know the exact coordinate of the partition wall?? please help me
  • Results Along Line

    Is there any way (such as programing cut lines into the input file/saving your cut lines) to not lose cut lines after making modifications to the model and re running the analysis? I found a post about this two years ago and I'm not sure if any enhancements…
  • Error Message: ***ERROR*** UNKNOWN MATERIAL TYPE PROVIDED. I have set all the materials myself with specific properties. No material has missing attributes when I click on select missing attributes. I just can't figure out what it thinks is timber.

    Here is the full output file script and a screenshot showing the materials. I would really appreciate any help. I could also send the file itself if that would help. Thanks for you help!! **************************************************** * * *…
  • In Staad foundation, no design result is getting generated

    sabbir ahmed -static - 07.05.22.std SOMEONE PLEASE REPLY, Calculation sheet is not available as design has failed, why it is showing ? sabbir ahmed -static - 07.05.22_foundation.xml
  • One-way ribbed slab

    How can i design a this kind of slab on staad pro, i'm still a new user of the software so please put some detail to help me.
  • Wind load does not show

    As you can see here the wind load does not show on the rest of the Z+ building face i tried to play with the ranges but it does not work the part where it does not show is a cantilivar beam the left side of the photo down here
  • I faced this error. please could you help me to solve this problem.

    this is the code STAAD SPACE START JOB INFORMATION ENGINEER DATE 09-Apr-22 END JOB INFORMATION INPUT WIDTH 79 UNIT METER KN JOINT COORDINATES 1 0 0 0; 2 0 12.085 0; 3 -1.05865e-015 0 5.763; 5 -2.11729e-015 0 11.526; 7 -3.17594e-015 0 17.289; 8 -3…
  • WARNING

    76. R1 1.0 77. CHECK SOFT STORY **WARNING - COMMAND REQUIRES SECTION FORCES, HOWEVER NO CASES ARE SOLVED YET. ***STAAD.Pro WARNING*** ANALYSIS NOT PERFORMED - SO ABOVE COMMAND CAN NOT BE PROCESSED I keep on getting this warning during my initial analysis…
  • Reg: Removing warning and notes in the Steel structure

    Hi, We are doing our final year project in the design of PEB structures. so we are using staad software to design and analysis the structure. we have received more warnings and notes like "instability at joints, weak spring added for stability, zero stiffness…
  • RE: Tunnel plate elements SQY for global shear

    Hello, I had a question regarding this simple circular tunnel model shown below. I have the following modeled to check the shear SQY. I know I'm missing something simple here so I hope I can get some help. L=100 ft (total longitudinal length)…
  • Combined footing tutorials

    Hello Everyone Please share with me the tutorials about a combined footings
  • RCDC Imposed load

    I'm Designing a Two-way solid slab (Slab on beams) from Staad pro to RCDC. What is the Imposed Load of RCDC? Does it mean the self-weight of a slab or Floor Finishing load?
  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…
  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?
  • moment diagram

    Dear sir, As per the attached file when i check the moment diagram for secondary beams 356*171*45 .staad showing as these beams are pinned and in my model,I am considering them as a fixed .Why moment is not coming at the end nodes? roof.std …
  • Yield Strength reduction as per Code

    Indian Standard material code ( IS 2062 ) specifies reduction in Yield strength based on plate thk ( 250MPA for plate thk <20, 240MPa for 20<thk<40, & 230MPa for plate thk >40.) Does staad pro takes this into consideration by default or one needs to…
  • RCDC Detailing Failure

    How to rectify this failure known as 'Detailing failure' in RCDC
  • cable analysis

    Dear sir, I am doing the analysis of cable but the reactions are coming with an extreme value like 66kn along x. There is no any weight on the cable only self-weight is considered. Kindly explain to me why reactions are so conservative. Also, guide…
  • MOMENT DISTRIBUTION WHEN PARTIALLY RELEASING MOMENTS IN BEAM

    How does Moment distribution and release for beams work in STAAD Pro ? While designing Secondary Beams, I’m releasing the moments MX, MY, MZ to a 100% at their ends. if I keep the ends fixed, I get a hogging moment say ‘ X ’ kN-m at the ends. However…