• Deflection

    Hello, Guys! I have added the TRACK 2 command along with the DFF to see the in-depth details of deflection. May I know if this, please see attached picture, can be seen somewhere in the postprocessing? Also, how can I get the deflection of the entire…
  • STAAD MODEL DOESN'T OPEN BUT OPENS IN EDITOR

    My perfectly working STAAD model file suddenly stopped working while updating in the editor. It opens in the editor but the model doesn't open. I have tried reinstalling the application as well. No luck yet. I use the below version.
  • can anyone help me with wind load generation (wind load general, static & dynamic) and assign using staad pro physcial modeler and also for seismic load also. Kindly explain the process briefly

    I need to understand how to generate loadings in physcial modeler like wind load & seismic loads. while doing in physical modeler, to apply/assign wind load to the structure I have to create the wind load definition in catalog tab and go to loading tab…
  • mat foundation for a tank

    Hello every one I'm trying to design mat foundation for a tank and the analysis result shows 0 moment in x and y. can anyone help me? I attached the file of staad to check it. Thank you
  • THE MEMBER 1 CAN NOT BE DESIGNED FOR BENDING AS THIS VERSION DOES NOT SUPPORT THE SELECTED SECTION, SELECT ANOTHER TYPE OF SECTION

    Why this keeps appearing, Guys? I got the same warning for HSS Rectangle standards. Can somebody help me please.
  • "DEFINE" COMMANDS FOR LOAD GENERATION SHOULD BE PROVIDED BEFORE SPECIFYING PRIMARY LOAD CASES.

    Tell me how can I get rif of this error please. DEFINE UBC ACCIDENTAL LOAD ZONE 0.4 I 1 RWX 3.5 RWZ 3.5 STYP 4 CT 0.0488 NA 1.2 NV 1.6 SELFWEIGHT 1.1 UNIT METER KN DEFINE WIND LOAD TYPE 1 WIND_PEDESTRIANBRIDGE <! STAAD PRO GENERATED DATA DO NOT MODIFY…
  • input unit in properties page

    Eventhough set up in metric METER , KILONEWTON and set up force units in display options, still when i define properties in property page in metre when it is entered the value is converted to inches.pl help
  • STAAD's Displacement

    Is this a normal displacement in STAAD.Pro Connect Edition? I am designing a pedestrian footbridge and I happened to encounter this displacement in a certain load case?
  • shear reinforcement is staad pro

    i am designing a beam from IS 456 in connect edition 1st time before SS4 is used so it is observed that spacing of the Shear Stirrups is more then 300 in old version it is limited to 300 currently I am using update 12 of the Connect Edition please look…
  • Instability in Slab Joint

    Hi, I am getting 2 warnings. Both are about instability in a joint in the My direction. The joints are highlighted in red in the following image. The joints highlighted are in the middle of the slabs. I have pinned the slab edges. Why are these…
  • How to find total axial capacity of a column in staadpro or RCDC calculation?

    I have analysed the model in staadpro and design the model in RCDC but I didn't found the total axial capacity of column the in RCDC calculation for column it shows only axial force acting on the column.
  • How to fix ** ERROR: IBC/UBC LOAD CASES MUST BE FIRST AND NO MORE THAN 8 CASES ARE PERMITTED. **. structure is irregular and unsymmetrical. 12 seismic load cases are required

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 11-May-23 END JOB INFORMATION INPUT WIDTH 79 UNIT METER KN JOINT COORDINATES 49 0 0 11; 50 4 0 11; 51 9 0 11; 52 14 0 11; 53 19 0 11; 54 22 0 11; 55 27.5 0 11; 56 33 0 11; 57 38 0 11; 58 43.5 0 11; 59 47…
  • How to fix ** ERROR: IBC/UBC LOAD CASES MUST BE FIRST AND NO MORE THAN 8 CASES ARE PERMITTED. ** The structure is irregular and unsymmetrical and it is required to do the 12 load cases

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 11-May-23 END JOB INFORMATION INPUT WIDTH 79 UNIT METER KN JOINT COORDINATES 49 0 0 11; 50 4 0 11; 51 9 0 11; 52 14 0 11; 53 19 0 11; 54 22 0 11; 55 27.5 0 11; 56 33 0 11; 57 38 0 11; 58 43.5 0 11; 59 47…
  • *** ERROR *** ABOVE COMMAND IS NOT RECOGNIZED. LINE IGNORED. anyone plz help me

    *** ERROR *** ABOVE COMMAND IS NOT RECOGNIZED. LINE IGNORED. i cant understand
  • ERROR WHILE RUNNING SECTIONS DEFINED IN USER TABLE

    Iam getting this error when i run my model with user table sections. But assigned sections are in the same folder where staad files are.
  • Temperature load

    4034.With Temperature_Rack.std.txt When I have applied temperature load and run the staad file it showed an abnormal unity ratio. Can you please check and suggest what is the issue? also check our applied temperature load calculation? For design,…
  • How do select the angle between truss members?

    I want create a truss I chose one from structure wizard but I want a specific angle between truss members at end points (usually referred as alpha) where I can change the default settings for this?
  • Side face blowout for group of anchors in tension RAM Connection

    Hi! I am having some issues with the calculations for side-face blowoutfor a group of anchors. I have that base plate. A 650x650 mm pedestal, and a 470x470 base plate with 8 anchors. (I don´t know why, but i can´t upload images right now) …
  • Location of OpenSTAADOEM

    Does anyone where is the folder OpenSTAADOEM after the installation.
  • Hi everyone, can someone help me about how to apply load for all model (if u have rectangular frame of the HEA 200) when crane driver carry up it to above ?

    hi
  • intel r visual fortran run-time error

    can anyone help me out regarding this issue during analysis?
  • HI, everyone can anybody help me to create frame for storge oil tank without support (fixed, pinned, foundation,.............etc), because we have crane carry up this frame, so weight of the model will go above cuz crane, need strong designer to solve...

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 19-Nov-22 END JOB INFORMATION INPUT WIDTH 79 UNIT MMS KN JOINT COORDINATES 12 14700 6850 0; 13 19450 6850 0; 14 27450 6850 0; 15 30101 6850 0; 16 14700 6850 4200; 17 19450 6850 4200; 18 27450 6850 4200;…
  • hello guys can anyone answer me for this point, what's different between specification beam (Release) and normal beam of the structure? the specification beam (release) will remove ?

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 05-Dec-22 END JOB INFORMATION INPUT WIDTH 79 UNIT METER KN JOINT COORDINATES 1 0 0 0; 2 10 0 0; 3 0 5 0; 4 10 5 0; 5 0 0 10; 6 10 0 10; 7 0 5 10; 8 10 5 10; 9 1.66667 5 0; 10 3.33333 5 0; 11 5 5 0; 12 6…
  • in section wizard , while importing the section by general section , error pops up says " profile point for this shape will not be exported"

    I am using a square section by TATA STRACTRA one on top of another.
  • WHAT IS MEANING OF FOLLOWING NOTE - NEAR DIAGONAL DECAY AT JOINT DIRECTION = MZ ?

    I'm getting a note after the analysis as shown below: **NOTE - NEAR DIAGONAL DECAY AT JOINT 511 DIRECTION = MZ. Even though the structure is symmetric, the support reactions of the left and right sides are differing. Please help to sort out this…