• MULTI RESPONSE MODIFICATION FACTOR

    Hallo, i have model with combination of steel ordinary moment frame (OMF) and concrete special moment resisting frame (SRMF). is there a way to create multi response seismic factor (R) in 1 staad file? with R for steel 3.5, and R for concrete is…
  • Hi everyone, can someone help me about how to apply load for all model (if u have rectangular frame of the HEA 200) when crane driver carry up it to above ?

    hi
  • HI, everyone can anybody help me to create frame for storge oil tank without support (fixed, pinned, foundation,.............etc), because we have crane carry up this frame, so weight of the model will go above cuz crane, need strong designer to solve...

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 19-Nov-22 END JOB INFORMATION INPUT WIDTH 79 UNIT MMS KN JOINT COORDINATES 12 14700 6850 0; 13 19450 6850 0; 14 27450 6850 0; 15 30101 6850 0; 16 14700 6850 4200; 17 19450 6850 4200; 18 27450 6850 4200;…
  • STAAD Aluminum Design

    I am trying to design a aluminum frame. the error I am getting is " wrong strength parameter". I tried to input - Fy - 5040, Fu - 5472, Ry - 1.1, Rt - 1.1, Fcu - 5040. Why am I getting error ? Please share correct values or am I selecting wrong Aluminum…
  • Regarding Lx parameter value.

    How to give the design parameter of Lx(lateral torsional buckling) For column member. In my case, The column height is 12m, Minor axis direction tied at each 3m. But major axis direction not tied. What is the Lx parameter value?
  • Does STAAD.Pro CONNECT Edition and all the workflow components work with the new Windows 11 OS?

    Windows 11 is the latest operating system from microsoft. Does STAAD.Pro CONNECT Edition work on windows 11?
  • WARNING: DESIGN OF SECTION FOR MEMBER # FOR PLATE SECTION

    Hello, I came across with an issue, could you please help me. I need to use plate member for stair stringer, Staad is showing errors for the analysis of the member. WARNING: DESIGN OF SECTION FOR MEMBER # Please help me how to rectify the…
  • Deflection Failure of Member , due 1/4" max limit for deflection limit

    Hi Please find attached Staad file, I need to Limit the deflection of member to 1/4" (MAX) per project standards. But for Member 11 & 12 , I am getting more than 1/4" deflections. Can I get any help to fix this, it will be highly appreciated. Thanks…
  • why adding a node on a beam shows different result when analyzed.

    when i add node in continuous beam they result are changed in analysis and design i get different utilization ratio. without node beam are failed and by add node beam became passed .why ?
  • STAAD Select Failed Members Cursor

    Did the "select failed members" cursor move or get removed? I didn't use it much, but noticed that I couldn't find it. Thanks
  • Reg: Removing warning and notes in the Steel structure

    Hi, We are doing our final year project in the design of PEB structures. so we are using staad software to design and analysis the structure. we have received more warnings and notes like "instability at joints, weak spring added for stability, zero stiffness…
  • Please help me to fix these warnings thankyo

  • Reason for slow STAAD.Pro model analysis

    Hello! I would just like to ask I am working on a big model like 25m by 180m and upon running the analysis, it stopped at RUN BY LOAD CASE or something. So I took a part out and removed some plates and turned all braces into truss members. It…
  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…
  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?
  • How to create a cantilever slab by using the Physical modeler?

    How to create a cantilever slab without beams in the Physical modeler in STAAD connect edition?
  • RCDC Detailing Failure

    How to rectify this failure known as 'Detailing failure' in RCDC
  • MOMENT DISTRIBUTION IN STAAD Pro FOR PARTIALLY RELEASED BEAMS

    How does Moment distribution and release for beams work in STAAD Pro ? While designing Secondary Beams, I’m generally releasing the moments MX, MY, MZ to a 100% at their ends. If I keep the ends fixed, I get a hogging moment say ‘ X ’ kN-m at the…
  • Can I Reduce Development length of bars in the beam by using RCDC

    Hello Everyone How can I reduce the development length bars in the beam (Figure 1-1), I'm running to get a result like this beam (figure 2-1) Figure 1-1 Figure 2-1
  • Can I design a Continuous two slabs by using RCDC STAAD?

    Hello Sir RCDC is designed and Detailed all the slab one by one but I want to detail all Top and Bottom Reinforcement of the two-way slab once, what should I do.
  • Mton/Cm to Kn/m

    How do I change Mton/Cm to Kn/m
  • SIG Virtual Workshop: STAAD - Modeling Finite Elements

    SIG Workshop: STAAD - Modeling Finite Elements Presenter: Sabrina Tedeschi, Application Engineer, Structural, Bentley Systems, Inc. Date/Time: May 21, 2020 1:00 P.M. EDT Register Now During this STAAD Special Interest Group virtual workshop…
  • ignore alone wind load case

    Sir, the bottom chord of my trusses is failing due to compression at wind load upward alone load case 5. But i want to ignore this case which will never happen alone due to dead load of 1 kn/m2 on the roof.I want to check my steel with load combinations…
  • Gantry crane design

    Does anybody designed Gantry crane using STAAD.Pro? Can anybody explain how can i assign whole surface of the rail on the ground as fixed? do i need to divide the rail in to small parts and assigned those nodes as fixed? or do i need to design Gantry…
  • Aluminum Design Results

    How do I view the Aluminum design results. I don't see a detailed report. However, I do see a utilization ratio. Which appears to be wrong. Thanks again!