• RAM Concept - Visibility of Detailing Rules

    When attempting to make a new set of Span Detailing Parameters in the 'Detailing Rules' tab, the window provided for editing a rule set is quite small in the vertical direction. Can this extended down to help with visibility. Thanks!
  • RE: RAM Concept: Span Detailer Producing more Reinforcement

    For AS 3600 2009 your bottom steel is probably controlled by section 8.1.6 or 9.4.3.2. For span detailing of RC and PT Two-Way Slabs - Figure 9.1.3.4 is implemented in support and span regions. Clause (b) says to use 75% of the area required by one of…
  • RAM Concept: Span Detailer Producing more Reinforcement

    Hi all, Just a quick question about the span detailing which I have never quite understood. Why is it that the design strips' span detailer produces more reinforcement? I understand that the overall quantity will increase, as the lengths of bars…
  • RE: RAM Concept - AS3600 Service Design Program Glitch

    From the screen capture, I see that you are reviewing results from Design Pass 0. This pass does not include user reinforcement, which is why the number of existing bars is shown as 0. Pass 0 was created solely for the purpose of span detailing. When…
  • RE: RAM Concept Minimum Code Reinforcement

    It appears that you are auditing the design check for Design Pass 0. If so, all user reinforcement is removed in this design pass, which is why Existing Reinforcement As = 0. Pass 0 was created solely for the purpose of span detailing. User defined reinforcement…