I'm having a problem with mu model. How would I make the deflections appear in the staad output file? All I am getting are these I am checking for strength and serviceability check. Load Envelope 1 for Srength and Load Envelope 2 for serviceability…

WE HAVE TRIED WITH THE FOLLOWING AVAILABLE COLD FORMED SECTIONS: Angle With Lips - 1 Double Angle (LD) Double Angle(SD) Channel With Lips Channel Without Lips Double Channel Back to Back Double Channel Front to Front Zee With Lips …

Hey All, While Modelling A Building In Staad Connect Edition, When I Model A Slab Of 5 X 5 m Size In C.E., It Takes The Length As 5.00001 m Irrespective of 5m Length Input, And So It Gives Error While Generating Floor Load With Boundary Of 5 X…

Hi all, I was wondering if anyone could provide some clarity on the use of UNL (UNB/UNT) in the case of cantilever members. What I know so far is that Ky and Kz would have some typical factor of 2 or 2.1 for cantilever members, and this impacts the…

Dear All, I got lot of warnings for the beams that the compressive axial stress in member exceed 0.08fck. What is the solution for that i have got lot of warnings regarding this. Please suggest me Thanks & Regards, Anirudh

Sir I have modelled and applied the loads in the staad interface the loads are applying but after the analysis in the output I'm getting warning that no member is loaded for the floor load generation! I have thoroughly checked the duplicate nodes,orphan…

Hi Bentley Team, I am in the process of modeling a steel structure with some steel hoppers. Running Integrity Check and Analysis Model show no issue with no error in the model. But when I want to move to Analytical Modeling, the following message…

how to connect beam to column. column size is 4m x .850m, baem size 0.750m x 0.400m. see the attach file image. Yellow line is the column. .