Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

How to create a cantilever slab without beams in the Physical modeler in STAAD connect edition?

How to rectify this failure known as 'Detailing failure' in RCDC

How do I change Mton/Cm to Kn/m

Hi Guys, Why are assigning both self weight and pressure loads on plates elements for building slab ?

warehouse.zip wind calculation also in that folder.... try to fix this probem guys

Dear sir, I designed a structure by using both method.in first method i deaigned it by composite beam method.and in second method i do it with composite deck.but by using composite beams giving lower utilization ratio than composite deck method.can…

I am analysing an RCC box girder for which some peculiar tapered sections have to be created. I created a tapered rectangular section in AutoCAD 2014. I used polyline to create the 2D and then extruded it to make it a solid 3D section. Now when I import…

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

Dear all, I did the dynamic simulation of a particular foundation on staad pro that the model was working without any problem. I've then added some rigid links at the bottom of foundation which have been linked to one spring at the center of gravity…

what define the axis of the design parameters like LY,LX,LZ,KY,KX,KZ and when to define each please help iam new to this.

Hello all, I am modelling a quite large structure in Staad Pro. There are several structure which require offsets. It is really a laborious job while doing this with Graphical method. Can you tell me how much important this offset is?? will it alter…