• Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

  • How to create a cantilever slab by using the Physical modeler?

    How to create a cantilever slab without beams in the Physical modeler in STAAD connect edition?

  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys

  • Setting the GROUND LEVEL in STAAD Pro

    Hi all, 1) Is there a way to set the ground level in STAAD Pro or is the y=0 level the permanent ground level? This is for the purpose of computing the seismic forces because, from what I know, distribution of the computed base shear per level of a structure…

  • section database property developed in STAADPRO is not recognized in STAAD Offshore

    Dear friends I need your help to solve a error when i try to open Staad pro model in STAAD offshore. I'm not able to load my model because user defined section database property developed in STAADPRO is not recognized in STAAD Offshore. How i need…

  • Re: LATERAL LOADING ON PLATES IN STAADPRO

    Hi Sir, I find a bit problem. First I create model and input the hydrostatic load and it's Ok. But then I create another model and input the hydrostatic load and there's a bit problem.. at the top slab (last slab, triangle-shaped load) it didn't show…

  • Re: LATERAL LOADING ON PLATES IN STAADPRO

    (sorry repost) Hi, thx a lot for your tutorial. I find a bit problem. First I create model and input the hydrostatic load and it's Ok. But then I create another model and input the hydrostatic load And there's a bit problem.. at the top slab…

  • Combatibilty Issues between STAAD PRO V8i SELECT SERIES 4 and STAAD OFFSHORE.

    dear friends, we are facing big combatibilty issues between STAAD PRO & STAAD OFFSHORE. some of the use facilities available in staad pro is not at all regonized by STAAD OFFSHORE. Because of this combatibility issues we are facing lots of problem…
Communities
Support and Services
Training and Learning
Social Media