STAAD SPACE START JOB INFORMATION ENGINEER DATE 19-Nov-22 END JOB INFORMATION INPUT WIDTH 79 UNIT MMS KN JOINT COORDINATES 12 14700 6850 0; 13 19450 6850 0; 14 27450 6850 0; 15 30101 6850 0; 16 14700 6850 4200; 17 19450 6850 4200; 18 27450 6850 4200;…

Hi, Based on NBCC 2015 4.1.8.11 4) single storey buildings with steel or wood deck as diaphragms can have a higher fundamental period compared to 4.1.8.11 3) as seen in the snap below. However, in the current RAM frame the Ta is only based on clause…

How to give the design parameter of Lx(lateral torsional buckling) For column member. In my case, The column height is 12m, Minor axis direction tied at each 3m. But major axis direction not tied. What is the Lx parameter value?

I'm trying to model HSS with different widths at its end. But I do not have any idea how to model it in RAM Elements. If anyone has a solution for this, please let me know. Thank you in advance. A section like this.

PEB.RESPONSE SPECTRUM ANALYSIS.std

I am attempting to assign and design gusset plate connections using Ram connection using data from a RSS model. When trying to assign a connection detail to a joint the error The joint composed by node "171" and members "120, 886" is not valid "Column…

How do I change Mton/Cm to Kn/m

SIG Workshop: STAAD - Modeling Finite Elements Presenter: Sabrina Tedeschi, Application Engineer, Structural, Bentley Systems, Inc. Date/Time: May 21, 2020 1:00 P.M. EDT Register Now During this STAAD Special Interest Group virtual workshop…

I am trying to model a Elevated steel water tank with bracing for analysis in STAAD.Pro. While modelling the structure I've encountered a problem and would like your help. The problem is: While the beam offset works perfectly for modelling a beam…

warehouse.zip wind calculation also in that folder.... try to fix this probem guys

Hello, Currently, I am using STAAD pro Connect edition's latest version. Following are question mainly targeting of RCC and Steel structure design in STAAD Pro and in other Bentley tools per Eurocode with German N ational Annex (NA). 1. Can…

Dear sir, I designed a structure by using both method.in first method i deaigned it by composite beam method.and in second method i do it with composite deck.but by using composite beams giving lower utilization ratio than composite deck method.can…

Is there any option to get report for the tension & compression flange stress ratio of built-up I-section for the critical load cases.

Dear sir , Kindly give me direction how I can check the deflection for the specific beams.stad file and drawing is attached.consultant want vibration check for specific beam.thanks. PDF STORE.std2.std

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

Actually i need all members UC Ratio values. How to get all values???? Please guys guide me New folder (2).rar

Hola; Necesito saber si es posible generar barras según las define el reglamento CIRSOC 301, como Itipo Grupo IV y Grupo V en RAM, como se ven en la imagen del link. https://www.google.com.ar/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&ved=2ahUKEwjp8…

Hello everyone, I have a question about the bi-axial bending and torsion calculations in StaadPro based on EC3. I designed a beam (RHS) subjected to bi-axial bending and torsion. I am comparing my hand calculations with Staad pro unity check but…