I have recently Installed Staad Pro and I am not able to view the report Tab see below snip, How I can turn it on? I am using STAAD.Pro 2023 - Version 23.00.01.25

Hello Bentley community, I'm encountering an issue with Staad.Pro regarding the inconsistency between a defined group and the results output. I would greatly appreciate any insights or guidance you can provide to help me resolve this problem. Here are…

Good day. I was analyzing a model and designing the plates I made at STAAD.Pro Advanced Connect Edition 22.00.00.15. After the run analysis, the result gave the above notice on several plate elements I had. I modeled the plate elements using parametric…

Hello i want to apply a load of 3kN/M2 on a plate element of 150mm thick which spans 0.9m x 2m so i created a dummy beam. 1) will one single dummy beam be enough? 2) will i have to convert the load to a line load (i.e: from per M2 to per m) or apply the…

STAAD.Pro ver. 22.04.00.40 ” The correct Cw (Warping constant) value is not assigned by the members ” I modeled all these members in the GUI. Other than PG(Plate Girder), I used American Property, and created User table about PG. Here, I compared…

I have modelled one simple structure in STAAD PRO and found that there are two types of displacement value in post processing. NODE and MEMBER. Which displacement shall i use for comparing with allowable displacement as per BS5950 code.

Hi, is there any way or how to add moments on Beam acting due to load on it.? Describing briefly, lets say there is an existing structure. Now there is a provision of new wall/ panel. so i want to check that " the base moment acting on that wall due…

Hello,sir: When I run analysis in STAAD PRO it can't continue and the error come out as the picture attached below. This model is OK but after some beams added this error come out. And I have tried to add MEMORY 120 or adjust the NL xxx but this problem…

On Friday, 28-September-2018 we posted a STAAD.Pro related video titled: " STAAD.Pro CONNECT Edition: Structural Analysis by Equivalent Static Method ". We'd be very interested in what you think of this style of video in terms of delivery and content…

Hey! For a frame structure, the self weight and floor loads (acting along gravity/global Y) which are defined in the dead and live load cases are defined again in the global directions(positive X, Y and Z directions) as dynamic masses for a time history…

pl lead me to STAAD PROBLEM EXAMPLE for a mast. Been to a STAAD training & seen an example problem in the handout, but no leads to it. i WOULIKE LIKE TO RUN THAT MODEL & LEARN ITS STRUCTURAL ANALY. & steel DESIGN TO Eurocode checks

I recently had some issues with Staad Pro force closing on my machine following some IT issues. I re-installed Staad which sorted the problem, however now a number of my models are failing where they didn't before the re-install. I'm currently designing…