• RAM Concept Ultimate moment not tally with '' strength design , top reinforcement plan '' output for RC beam design

    q Dear all, I noticed that the Ult Moment from the design strip is not tally with the output of the area of steel reinforcement require for the beam design. The photos attached above : Beam size : 600 X 1000/1300 Mult = -1420 kNm (hogging) …

  • HI, everyone can anyone help me to solve about how to apply loads roof if we have 113Kn? thanks 4 all.

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 30-Nov-22 END JOB INFORMATION INPUT WIDTH 79 UNIT MMS KN JOINT COORDINATES 55 468.544 16072.7 192.577; 73 507.061 16072.7 -1.061; 107 358.857 16072.7 356.735; 152 7609.76 14763.6 -1.061; 153 467.483 16072…

  • Live load reduction parameter

    Ram Concept allows users to select the code for live load reduction. I selected IBC 2018. The slab longitudinal and latitude strip trib areas were approx. 400 sq ft. each. Based on live load reduction formula, since the trib area times Kll factor was…

  • Analysis Error regarding Code Rules

    https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/220024/long-term-deflection-error-message/673947#673947 I have posted under this related question-set. Can these errors be ignored?

  • Precompression Failure

    Hello, I am seeing a precompression failure for my two-way slab with opening infill beams (Layers > Deign Status > Status Plan). When I go to use the Auditor tool, I do not see much information about the precompression failure (i.e., the needed precompression…

  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys

  • how to get the loadings details in report????

    I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

  • UC Ratio problem

    Actually i need all members UC Ratio values. How to get all values???? Please guys guide me New folder (2).rar

  • RE: RAM Concept - Vibration Analysis Questions

    1. Yes, both the superimposed dead load and live load should be modeled on Additional Mass Loading. 2. The frequency for each mode can be reviewed using Layers - Vibrations - Vibration Analysis - Tables - Vibration Frequencies. 3. The Excitation Response…

  • Ram Concept - Long term losses

    Hi, This is my first post in this forum. I'm currently working for a post-tension consultant in Australia. I have some questions regarding Ram Concept and post-tension long-term losses According to Ram Concept manual the long-term losses includes…
Communities
Support and Services
Training and Learning
Social Media