Hello Everyone Please share with me the tutorials about a combined footings

I tried it quite times looking at responses here still I could not resolved it can any one help me with ? and check in the file as I shared it here. 5807.TK_STR.STD

Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

I am trying to design the beams for the concrete structure I analysed in STAAD but every I arrive at Beam design, when I click on the "design button", it gives me the error message "Beam forces not imported". I an able to design columns, slabs and footing…

Hello, I´m designing two small guardhouses in STAAD.Pro V8i SS5, both are RC structures with slab foundations, they are almost equal in principal geometry, loading and sections, the only thing that changes considerably from one model to the other is the…

Hello. How does STAAD compute the modulus of elasticity of concrete (default material properties)? The default values are: fcu is 27.58 MPa E is 21728 MPa Say I would like to use f'c = 27 MPa, what would be the corresponding E and fcu? I know…

I am analysing an RCC box girder for which some peculiar tapered sections have to be created. I created a tapered rectangular section in AutoCAD 2014. I used polyline to create the 2D and then extruded it to make it a solid 3D section. Now when I import…

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

When checking a Mat Foundation Job, after: analysis; Moment Envelope Generation and Design Parameters; one can use the Moment Capacity Check . One can enter the reinforcing and materials parameters and then check capacity vs. the moment diagram. I've…