Hey all, I have a question about the view diagrams tab in RAM Structural System's "Steel Beam / Joist Module". If I go to View Update and select a beam, the moment listed under "View Results" for the 1.4DL case is given as 114.3 kip-ft , but if I go to…

To whom it may concern, Per the RAM SS v17.04 release notes ( RAM SS v17.04 Release Notes ), the SteelBeamResults tab cannot be exported if there is a horizontal brace in the model. I do not model horizontal braces in RAM SS, and the following models…

Hello, Please advise if this type of beam reinforcement can be done in STAAD. Thank you,

As shown in the image above, a project we have has steel beams connected to concrete columns. Based on geometry alone there should be a moment applied to the column during design in the Concrete module. Added to this, the red beam on the left has a gravity…

Hello, Someone in our office has a building model and has been checking beams with web openings. On one beam in particular, the report does not indicate the beam is failing, but the view update and heat map both show D/C ratio is exceeded. I deleted…

Is there a way to make a user defined double steel section? Basically two W-shaped steel section side by side welded together? In RAM elements there is an available section type for such a section called 2Ws but I am not sure if RAM SS has the same. I…

2 requests here for functionality in RAM Structural System's steel beam module: An undo function like the Modeler module has (and almost every other program). I don't know about about anyone else, but I have made a mistake once or twice... The Measure…

I get the error "This features [typo] requires RAM SBeam Version 4.0 or Higher to be installed" whenever I use process->export to Sbeam and click on a beam in the RAM Steel Beam/Joist Module. The module is version 15.02.00.000, and I have RAM Sbeam version…