Dear Team I am working with the Staad model for buckling analysis . The buckling load factor is given by the staad after the analysis , wanted to understand the how to manually check the Buckling load factor using Critical Euler equation . I have manually…

Hi. I recently got access to the student license of STAAD Pro. It was working well until last few days. The application is not starting. Below given screen appears and then there is no further movement in the loading. I tried re-installing the application…

Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

How to create a cantilever slab without beams in the Physical modeler in STAAD connect edition?

How to rectify this failure known as 'Detailing failure' in RCDC

Hello Everyone How can I reduce the development length bars in the beam (Figure 1-1), I'm running to get a result like this beam (figure 2-1) Figure 1-1 Figure 2-1

Hello Sir RCDC is designed and Detailed all the slab one by one but I want to detail all Top and Bottom Reinforcement of the two-way slab once, what should I do.

How do I change Mton/Cm to Kn/m

Hello all, I am working on a structural analysis for an existing structure where I've needed to model ST6 I 15.9 members (AISC-360, 7th Edition). Because this a very uncommon section that is not in the Section Database, I've instead added it through the…

Hello all, I am working on a structural analysis for an existing structure where I've needed to model ST6 I 15.9 members (AISC-360, 7th Edition). Because this a very uncommon section that is not in the Section Database, I've instead added it through the…

I am trying to model a Elevated steel water tank with bracing for analysis in STAAD.Pro. While modelling the structure I've encountered a problem and would like your help. The problem is: While the beam offset works perfectly for modelling a beam…

Dear sir, In attached stad file .I am applying the dead load 2kn/m2 as floor load. 1.somewhere i am attaching two secondary beams with primary beams with the same node.is this load distributed all over the area same as 2kn/m2 or where i am having…

warehouse.zip wind calculation also in that folder.... try to fix this probem guys

I am analysing an RCC box girder for which some peculiar tapered sections have to be created. I created a tapered rectangular section in AutoCAD 2014. I used polyline to create the 2D and then extruded it to make it a solid 3D section. Now when I import…

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

Dear All, I want to ask about the vibration of machine. As far as I know, we need to input as sine function. Am I right? I assumed the weight of machine is 110 kN and assumed that 10% of weight will be placed as the vibration. I use…

Hi, STAAD v8i doesn't run analysis without MEMORY-command in input file. Output file then only contents of two lines: 1. STAAD SPACE ERROR NOT ENOUGH MEMORY TO START ANALYSIS. ( 41 ) But available memory should be enough. We tested…

Build 03 of STAAD.Pro 2007 will be available on Bentley SELECT servers tomorrow, July 11. This update includes 22 new features and 115 additional updates. See here for some more info on some of these new features.

I am currently modeling a 2 way slab in STAAD.Pro and I was wondering if anyone new of a good way to verify the validity of the model. Thanks, Hillary

There has been a new QA&R posting of STAAD.Pro V8i SELECTSeries 1 (build 20.07.06.35) on the Bentley SELECT server that addresses a number of issues which were not addressed in build 20.07.06.34 released on 18th March 2010. The additional issues addressed…

Join us for our Free seminar this Friday July 19th. Click Here for login information and a full description of Insider Skills. This weeks Topics: Wind Load Generation Floor Loading Options Seismic Load Generation Custom Section User…

Section 5.20.3 states that "f 1 (Depth of section at start node) should always be greater than f 3 (Depth of section at end node)." In the model I am working in, it makes more sense for me to define my members from left to right which results in some…