Is there a way to design only a few members in RAM Elements? In my case, I imported floor framing from RAM Structure System into Elements in order to determine chord and collector forces. Consequently, I still have all the gravity members in the model…

Hi, Based on NBCC 2015 4.1.8.11 4) single storey buildings with steel or wood deck as diaphragms can have a higher fundamental period compared to 4.1.8.11 3) as seen in the snap below. However, in the current RAM frame the Ta is only based on clause…

Hello, I came across with an issue, could you please help me. I need to use plate member for stair stringer, Staad is showing errors for the analysis of the member. WARNING: DESIGN OF SECTION FOR MEMBER # Please help me how to rectify the…

WHEN I CLICK ON AUTO DESIGN (WHILE DESIGNING COL) IN RCDC THIS ERROR SHOWS HOW TO SOLVE IT? I USED .accdb FILE FROM ETABS V19. Item has already been added. Key in dictionary: '0' Key being added: '0'

Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

How to create a cantilever slab without beams in the Physical modeler in STAAD connect edition?

How to rectify this failure known as 'Detailing failure' in RCDC

Hello Everyone How can I reduce the development length bars in the beam (Figure 1-1), I'm running to get a result like this beam (figure 2-1) Figure 1-1 Figure 2-1

Hello Sir RCDC is designed and Detailed all the slab one by one but I want to detail all Top and Bottom Reinforcement of the two-way slab once, what should I do.

How do I change Mton/Cm to Kn/m

Hello, I received this message when I went to import my RAM Frame analysis to RAM Connection. I noticed that my load combinations did not appear in RAM Connection, and I was puzzled why. I found that I could generate my loads, but my base plate design…

Hello, I´m designing two small guardhouses in STAAD.Pro V8i SS5, both are RC structures with slab foundations, they are almost equal in principal geometry, loading and sections, the only thing that changes considerably from one model to the other is the…

I am trying to model a Elevated steel water tank with bracing for analysis in STAAD.Pro. While modelling the structure I've encountered a problem and would like your help. The problem is: While the beam offset works perfectly for modelling a beam…

warehouse.zip wind calculation also in that folder.... try to fix this probem guys

I am analysing an RCC box girder for which some peculiar tapered sections have to be created. I created a tapered rectangular section in AutoCAD 2014. I used polyline to create the 2D and then extruded it to make it a solid 3D section. Now when I import…

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

Hola; Necesito saber si es posible generar barras según las define el reglamento CIRSOC 301, como Itipo Grupo IV y Grupo V en RAM, como se ven en la imagen del link. https://www.google.com.ar/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&ved=2ahUKEwjp8…