Bentley Communities

problem in RCDC how to solve this error

AJINKYA CHINTALWAL
- over 1 year ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
3D STEEL TRUSS DESIGN

Joseph Lucas Magare

I want to design this kind of steel truss in Staad Pro Connect Edition, should i run analysis in staad space or staad plane which one is correct?
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
LINE LOAD ON ANALYTICAL MODEL STAAD PRO CONNECT EDITION

Joseph Lucas Magare

Addition of partition wall load on slab should be added on analytical model in Staad Pro Connect Edition
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
PROJECT OF FLAT SLAB, WITHOUT BEAMS STAAD PRO CONNECT EDITION

Joseph Lucas Magare

Option for modelling,analysis and design of a project with flat slab should be added in Staad Pro Connect Edition
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
CANTILEVER SLAB IN RCDC

Joseph Lucas Magare

Design of cantilever slab in RCDC should be added and also slab supported by beams on its two sides and its other two sides free or only three sides are supported by beams and the other side free.
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
DEFLECTION CHECK OF RCC PLATES (RAMP)

Joseph Lucas Magare

Iam designing a reinforced concrete ramp as a plate,the difficult iam facing is there is no BS 8110 in analytical design,and with the available BS 8007 i cant check deflection of the plate.
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
BS 8110

Joseph Lucas Magare

BS 8110 should be added currently is not available in design at analytical modeling ,the BS available for concrete is only BS 8007.
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
ADDITION OF LINE LOAD ON PLATE

Joseph Lucas Magare

Option for adding wall load (partition wall) as line load direct on slab should be added
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
RCDC ERROR WHILE DESIGNING BEAM (STAAD PRO CONNECT EDITION UPDATE 5)

Joseph Lucas Magare

During design of beam in rcdc,if i put a check of crack width the software will not design and it gives a message written "Cannot find column [StAstTop] but if i dont check for crack width the software works perfectly.Need a help on this problem because…
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
RCDC ERROR WHILE DESIGNING BEAM (STAAD PRO CONNECT EDITION UPDATE 5)

Joseph Lucas Magare

During design of beam in rcdc,if i put a check of crack width the software will not design and it gives a message written "Cannot find column [StAstTop] but if i dont check for crack width the software works perfectly.Need a help on this problem because…
- over 2 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
CONCRETE GRADE SELECTION IN RCDC

Joseph Lucas Magare

I think it will be better during design in RCDC,to select the concrete grade of column separately from that of wall.Concrete grade should be divided into two parts one for columns and the other one for walls.
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
PARAMETRIC WALL FOUNDATION DESIGN

Joseph Lucas Magare

May you please improve the design of foundation of parametric wall in RCDC,lets say if i want my footing size to be 1500mm by 300mm depth,but the left side i want it to be 400mm from centre of wall and right side to be 1100mm from centre of wall,currently…
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
FLOOR LOAD FAILURE

Joseph Lucas Magare

Improvement should be done on RC wall, during modelling on places of RC wall i don't place beam on top of the wall because the wall it self act as a beam,but when it comes to assign of floor load in places where there is no beam on RC wall the floor load…
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
Stirrup strength

Joseph Lucas Magare

May you add an option for choosing the strength stirrups in RCDC,by default is 250 but when i want to use stirrup of 410 its not possible to change its strength in RCDC
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
COMBINED FOOTING, RAFT FOOTING IN RCDC

Joseph Lucas Magare

May you please include the design of raft foundation and combined footing in RCDC
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
SLANT BEAM DESIGN IN RCDC

Joseph Lucas Magare

May you please update the design of Slant beam in RCDC,as you may have a building has a certain slope from one grid to another
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
FLAT SLAB, RIBBED SLAB AND WAFFLE SLAB

Joseph Lucas Magare

May you please include the design of waffle slab, ribbed slab and flat slab in rcdc
- over 2 years ago
- RAM | STAAD | ADINA
- STAAD.Pro
Design of Solid slab (Conventional slabs)

Sulaiman Ade

Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…
- Answered
- over 2 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
Design of Columns for Bi-axial bending in RCDC

Likhin

Dear Bentley Support Team, I recently raised an issue related to Design error in the RCDC program. The program erroneously calculates the reinforcements for the columns under bi-axial bending and reports lower reinforcements than what is actually expected…
- over 5 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum