• *** ERROR *** ABOVE COMMAND IS NOT RECOGNIZED. LINE IGNORED. anyone plz help me

    *** ERROR *** ABOVE COMMAND IS NOT RECOGNIZED. LINE IGNORED. i cant understand

  • HI, everyone can anybody help me to create frame for storge oil tank without support (fixed, pinned, foundation,.............etc), because we have crane carry up this frame, so weight of the model will go above cuz crane, need strong designer to solve...

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 19-Nov-22 END JOB INFORMATION INPUT WIDTH 79 UNIT MMS KN JOINT COORDINATES 12 14700 6850 0; 13 19450 6850 0; 14 27450 6850 0; 15 30101 6850 0; 16 14700 6850 4200; 17 19450 6850 4200; 18 27450 6850 4200;…

  • hello guys can anyone answer me for this point, what's different between specification beam (Release) and normal beam of the structure? the specification beam (release) will remove ?

    STAAD SPACE START JOB INFORMATION ENGINEER DATE 05-Dec-22 END JOB INFORMATION INPUT WIDTH 79 UNIT METER KN JOINT COORDINATES 1 0 0 0; 2 10 0 0; 3 0 5 0; 4 10 5 0; 5 0 0 10; 6 10 0 10; 7 0 5 10; 8 10 5 10; 9 1.66667 5 0; 10 3.33333 5 0; 11 5 5 0; 12 6…

  • Gantry beam on laced built up column

    Hi, I'm designing some built-up columns using equal angle sections and I'm getting some results. Pls can someone check my model if this is correct. I've used the slave-master command to connect the I-beam onto the built-up column. Is this correct as…

  • Wind load does not show

    As you can see here the wind load does not show on the rest of the Z+ building face i tried to play with the ranges but it does not work the part where it does not show is a cantilivar beam the left side of the photo down here

  • why adding a node on a beam shows different result when analyzed.

    when i add node in continuous beam they result are changed in analysis and design i get different utilization ratio. without node beam are failed and by add node beam became passed .why ?

  • PLATE STRESS AND CUTTING LINE DIAGRAM IN MIDAS GEN

    Dear Bentley members, I have tried Plate model in Midas Gen and staad pro, In Midas there was one option called Cutting line diagram for understanding the Plate bending diagram, Similarly is there any tool in Staad pro?. Or any method for understanding…

  • Combined footing tutorials

    Hello Everyone Please share with me the tutorials about a combined footings

  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

  • How to create a cantilever slab by using the Physical modeler?

    How to create a cantilever slab without beams in the Physical modeler in STAAD connect edition?

  • Mton/Cm to Kn/m

    How do I change Mton/Cm to Kn/m

  • STAAD Pro and RAM

    Good Day, I would like to pose a question relating to the comparison between the RAM suite of software and those included with STAAD. Traditionally, my firm has used STAAD to complete all our structural analysis and design, however, considering as the…

  • Multilinear Spring Definitions (in +X and -X global coordinates) Error?

    Hello all, I have a rather unique problem that I could not find a solution to via Bentley STAAD forums or online. I have errors in defining a multilinear spring in the global -X direction for a movable structure subject to a large asymmetrical load…

  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys

  • Result extraction

    Hi Everyone. we face a problem while extracting beam section forces results for a beam with torsion property. while the member is defined with torsion property, post extraction the result needs further processing to convert all the torsion moments into…

  • Shear results from query dialog box and postprocessing are different, so which is correct, please help me

  • how to get the loadings details in report????

    I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

  • UC Ratio problem

    Actually i need all members UC Ratio values. How to get all values???? Please guys guide me New folder (2).rar

  • how to reduce deflection????

  • ¿Simplificar todo su análisis estructural con un solo software?

    Producto(s): Structural Enterprise Versión(s): 20.07.11.82 Entorno: Windows 7 32 bit,Windows 7 64 bit,Windows 8 Área: N/A Subárea: N\A ¿Qué es lo que incluye la licencia de Structural Enterprise…

  • RAM Concept 5.1.0 Release Notes

    RAM Concept V8i SELECTseries 8, r5.1.0, Release Notes Release Date: October 22, 2013 Recommendations RAM Concept V8i Release 5.1.0 is recommended for all projects, except those that are nearing final design. Installation Instructions RAM…

  • Viewing CIS/2 Files

    If you work with CIS/2 files in your structural project workflow, you may find a new article in the Wiki helpful. It describes a free tool available from NIST to view a CIS/2 3D model in a web browser. Viewing CIS/2 FIles Steve
Communities
Support and Services
Training and Learning
Social Media